fuel injection For PC Windows and macOS -Free Download

fuel injection For PC EXE/DMG, Laptop, Desktop, and Computer. Method to download and install on Windows 10, MacOS. Latest edition of “fuel injection” app is completable to setup the on both 32bit and 64bit.

Download & ScreenShots:

How To Free Download and Guide To Install fuel injection App on Windows PC 32/64bi & macOS

Here is the proper guide to free download fuel injection software for PC as an alternative to EXE/DMG. Also, the installation method with the best Android engine like Bluestacks mobile emulator or Nox Android APK App player. These engines are highly recommended to run the APK of fuel injection on Windows 10, 8, 7 (all edition), computers, desktops, laptops, and Mac.

  1. Download any emulator below. The official landing pages are below.
  2. Best free mobile emulators are here: BlueStacks.com and BigNox.com
  3. Download & open any on above and use Google ID as an Android device.
  4. Play Store contains fuel injection app. So easily took it
  5. Tap via the mouse on the install point below the fuel injection logo to start download

Q & A Of fuel injection With Features & Using Method

Principle of diesel
Feeding circuit
Preheating circuit
Injection pumps
TP 1: Periodic maintenance of the diesel engine
TP 2: Repairing the Diesel Fuel System
TP 3: Disassembly, inspection, repair, assembly and adjustment of an injector
TP 4: Check and repair the cold start circuit
TP 5: Remove and refit the injection pump
TP 6: Controls and settings
Diesel injection system
THE DIESEL INJECTION SYSTEM
– Control on the different elements of a rotary injection pump;
– Disassembly and reassembly of a rotary injection pump
– Questions and problems
– Real or simulated cases or representative vehicles
The diesel engine is a self-igniting engine that sucks in only air and compresses it. This process provides significantly greater compression than the knock-sensitive gasoline engine with a mixture of air and fuel and controlled ignition.
Features of a diesel engine
Advance at admission opening (A.O.A)
Delayed closure of admission (R.F.A)
Advance on ignition (A.A)
Advance at the opening of the exhaust (A.O.E)
Exhaust Closing Delay (R.F.E)
Real Diagram
Advantage of the diesel engine
Disadvantages of the diesel engine
Feeding circuit
Fuel Filter
Feed pump
Injection pump
Speed ​​regulator
Inverter
Discharge pipes
injectors
Different types of power circuits
Supply circuit with pump in line
Circuit in “Aspiration”
Circuit in “low pressure”
Supply circuit with dispensing pump
air filter
Gasoil filter
Filters with priming pump
piping
Feeding pumps
Main types of feed pumps
Diaphragm pump
Piston pump
Single acting pump
Transfer phase
By turning, the camshaft of the injection pump brings the eccentric (1) to the high position. The piston (4) is pushed upwards by the roller (2) and the rod (3). The displacement of the piston causes the shutter (6) to close under the effect of the fuel pressure in the chamber (7), the valve (8) moves away from its seat, the gas oil contained in the chamber (7) s flows towards the chamber (9) it is the transfer phase.
Self-regulating phase

The flow rate of the feed pump being greater than the flow delivered by the injection pump, there comes a time when the pressure in the chamber (9) is equal to the pressure of the spring (5) on the piston (4); it can no longer move, there is no aspiration or repression: it is the self-regulating phase. Recall that the roller (2) is always in contact with the eccentric (1) via a return spring not shown in the diagram.
Left suction. In the center: transfer phase. Right: self-regulating phase.
1.Excentric on the camshaft of the injection pump; 2.Galet; 3. Stem; 4.Piston; 5.Ressort; 6.Admission valve; 7. Room; 8. Discharge valve; 9.Transfer room.
1.Excentric on the camshaft of the injection pump; 2.Galet; 3. 4.Admission valve; 5.Piston; 6.Admission room; 7.Admission valve; 8.Compression chamber; 9.Ressort; 10. Discharge valve; 11.Bedroom; 12. Discharge valve; 13.Transfer room
Injectors
Types of injectors
a) nipple injector and throttling b) injector with holes.

1.Arrival, 2.Support body, 3.Removal nut, 4.Install disc, 5.Injector, 6.Pump-discharge union-nipple, 7.Train-rod, 8.Leak recovery shaft, 9 . Tensioning washers, 10. Discharge channel, 11. Spring, 12. Push rod, 13. Positioning spindle.
Types of injectors.
a) Nipple injector and throttling,
b) Injector with holes.
1.Pressure stud, 2.Injector body,
3.Injector needle, 4.Income finishing,
5.Compression Chamber, 6.Injection Hole,
7. Injection Teat, 8. Pilot Hole,
ofppt trem

What’s New Added On The Latest Edition Of fuel injection Software

Updated

May 14, 2019

Size

23M

Installs

1,000+

Current Version

2.1

Requires Android

4.1 and up

Content Rating

Everyone

Permissions

Offered By

Developer lab

Disclaimer for fuel injection App

Ksniffer.org is the not the owner of the fuel injection software. Also, Ksniffer.org is not doing an affiliation for it. The following properties such as the app, logo, trademarks & SS all are the owner is its honorable developer.

Even, we are not directly uploading fuel injection apps on our website. Every install will be started from the official software store of the fuel injection app.

Related Apps

Leave a Reply

Your email address will not be published. Required fields are marked *

PlayStorehttps://play.google.com/store/apps/details?id=com.fuel.injectionUrl